Hydraulic Power Press (Electrical)
USES & APPLICATION : Electric Motor, Submersible Pump, Ball Bearing Factory, Re-paring Workshop, Auto Service Station & Industrial Work, Like Pressure, Bending, Straightening, Embossing, Broaching of Steel, Iron, Plastic, Rubber Etc.
FRAME : Column and Bottom are Fabricated from Heavy Mild Steel. The working table is operated vertically and Adjusted by worm winch. Rollers are provided easy Heavy work.
CYLINDER : Hydraulic Cylinder is made out of Seamless pipe with Accurate Boaring, Grinding, Honing and Piston from special Rigid Steel with the same Accuracy with U-Cups / Chevron Packing and Rubber O-Ring Etc.Socket is provided for DIA-PUNCH work.
HAND PUMP : Double Plunger Pump gives Quick Ram Travel with Low Pressure and Slow Speed Develops with High Pressure Plunger.
POWER PACK : Required Power Pack is Provided with Gear Pump, Vane Pump, Plunger Pump. Control Valve, Connecting Hoses Pipes, Pressure Meter Etc.
PRESSURE ADJUSTMENT : Pressure on Piston Rod can be adjusted from 5% to Maximum pressure by safety valve.
SYSTEM OF OPERATION : Hydraulic power press is available in hand operated of motorized system.
|Capacity (Tonne)||Distance Between Column (mm)||Distance Between Ram to Bed (mm)||Motor H.P.|
|5||600 x 175||100 x 500||0.5|
|15||750 x 200||150 x 700||1|
|25||800 x 275||175 x 800||1.5|
|40||950 x 375||175 x 900||2|
|60||1015 x 430||175 x 900||3|
|75||1125 x 450||175 x 900||3|
|100||1200 x 510||175 x 900||5|
|150||1300 x 600||200 x 1000||5|